Two-component condensation RTV silicone rubber by the A, B two components, curing speed can be adjusted, the depth of cure with good process performance.
Features Uses: Suitable for electronic components, circuit boards, transformers and large-area adhesive potting seals, insulation, moisture, shock.
Instructions:
1、The group A and B respectively stir, press A, B groups in a weight ratio of 100: 5 ratio weighed stir(If necessary vacuum degasser) to potting.
Technical Specifications:
Exterior | Nan da310、311silicone | ||
Transparent viscous liquid | Translucent viscous liquid | ||
solid Of before | Viscosity(pa ·s) | 4.0~20 | 6.0~20 |
allows the operating time(min)25℃ | 0.5~1.5 | 0.5~1.5 | |
Curing time hours / room temperature | 6-24 | 6-24 | |
solid Of Rear | Temperature(℃) | -60~200 | -60~200 |
Shao bottom hardness(≥A) | 20 | 20 | |
tensile strength(≥Mpa) | 0.4~0.6 | 06~1.2 | |
Elongation(≥%) | 100 | 120 | |
Volume resistivity(≥Ω·cm) | 1.0*10 15 | 1.0*10 14 | |
Permittivity(1MHz≤) | 3.0 | 3.0 | |
Dielectric strength(kv/mm)≥ | 17 | 17 | |
density(g·cm 3 ) | 0.98 | 1.0 |
Storage conditions: room temperature cool place, with the latter group B, tighten the cap. Duration: six months.